Diver, Paradive (400)
Click on the image for larger slideshow
  • Diver, Paradive Back (400)
  • Diver, Paradive Back (400)
  • Diver, Paradive Movement (400)
  • Diver, Paradive Movement (400)
  • Diver, Paradive Side (400)
  • Diver, Paradive Side (400)
  • Diver, Paradive Side (400)
  • Diver, Paradive Side (400)
  • Diver, Paradive (400)
  • Diver, Paradive (400)
Diver, Paradive (1002) | Type I Date, 12hr Standard Bezel
Availability: Temporarily out of stock

Ordering Closed



The Paradive is my interpretation of the watch issued to US Special Forces and CIA maritime units from the 1960s up to the early 1980s. The original watch was especially developed for the US military and never sold commercially. The only way to get one was to earn one. We took the original and modernized and upgraded the design.

Our concept was to produce a watch that the modern US military might have requisitioned if the watch was re-introduced today. We replaced the bi-directional bezel with the modern safety feature of the uni-directional bezel for diving, ensuring that one would always under-estimate the oxygen remaining. We also introduced a helium release valve (HRV) to the design, enabling the watch to serve salvage diver and combat diver alike. The HRV essentially pressure proofs the watch against the thin air of high altitudes and the special helium gas mixture used by saturation divers. The original acrylic crystal was upgraded to an anti-reflective coated sapphire crystal and the monocoque case replaced with a two piece design that is significantly easier to service. The bezel inlay is a durable hard anodized aluminum featuring enamel paint filled engraved numbers and a SuperLumiNova BGW9 triangle at 12 o'clock.

Additional Information

• Case Width:      

41.25 mm (bezel diameter)

• Case Thickness:       15.50 mm
• Case length:       49.50 mm end to end
• Lug width:       20.00 mm
Weight:       105 grams
Crystal:       Double domed sapphire crystal, with anti-reflective coating on interior surface only
Luminous:       SuperLumiNova BGW9 rated to glow on a full charge for a minimum of 7 hours

ETA 2836-2 (Elabore grade/Rhodium plated), highly decorated (rotor features Côtes de Genève, decorated bridges), Incabloc shock protection, hack setting, automatic with manual winding capability.

Water resistance:       30 ATMs (300 meters)
Case Finish:       Bead blasted 316L stainless steel

Drilled through lugs.

Double gasket screw-down crown

120 click unidirectional bezel

Strap: Bracleet, Natural rubber dive strap, or Maratac NATO strap

Bezel: Hard anodized aluminum inlay

Timed in 6 positions for optimal time keeping performance.